Cold Shot Chillers designs, assembles, and tests 10-ton water chillers in Houston, Texas. These industrial-grade chillers meet UL Listed standards and are engineered for demanding industrial process cooling applications. Models are available as air-cooled chillers or water-cooled systems. Options include stationary, portable, and reverse flow designs to meet a wide range of chiller system requirements.
In industry terms, “portable” refers to a self-contained chiller with an internal pumping system, tank, and evaporator, not mobility after installation.
The 10-ton ACWC-120-Q air-cooled chiller features a multi-stage hermetic scroll compressor using R410A refrigerant. Key components include a stainless steel, copper, and bronze evaporator, centrifugal pump, and flow safety switch. With proper maintenance, this unit offers reliable operation for years.
Stationary models omit the pump and tank. The ACWC-120-QST specifications model provides refrigeration components connected to an evaporator. An external pump/tank circulates process fluid to maintain the minimum recommended operating temperature.
This model offers a single power connection, supply wiring, and dry contacts to prevent pump-only operation, reducing excess fluid heat.
A “reverse flow” portable chiller refers to a chiller that does not include a tank. The tank is external to the chiller and contains water or some other heat transfer fluid which is recirculated through the tank and the chiller. In some applications the fluid is potable drinking water used for dough mixing applications.
Cold Shot Chillers 10 Ton model ACWC-120-QRF air-cooled water chiller includes a hermetic scroll compressor with two stage capabilities. Two-stage compressors operate at two different speeds, allowing them to match the heat load of the application more closely. There are fewer moving parts which makes for a reliable and quiet operation.
The unit weighs approximately 1450 lbs. in total with dimensions of 73.5” L x 39.5” W x 67” H.
The WCWC-120-E water-cooled chiller system uses a condenser with condensing water up to 85°F from sources like cooling towers. Typically installed indoors near processes, it’s quieter than air cooled alternatives.
Features a two-stage scroll compressor with an LED controller offering alarms and self-diagnostics for immediate factory pricing inquiries.
Model WCWC-120-ERF is a reverse flow design, requiring proximity to an external tank to avoid pump cavitation. It ensures minimum recommended operating temperature, supporting processes with strict incoming fluid temperature needs.
The heat from the fluid is transferred to the condensing water efficiently, keeping the process stable and consistent.
| Model # | Type | Style | Capacity | Voltage | Pump HP + Flow Rate | Connections |
| ACWC-120-Q | Air-cooled | Portable | 120,000 BTU/HR* | 208-230/3/60460/3/60 | 1-1/2 HP 55gpm@30psi | 1 1/4” MNPT IN/ OUT |
| ACWC-120-Q-ST | Air-cooled | Stationary | 120,000 BTU/HR* | 208-230/3/60460/3/60 | N/A | 1 1/4” MNPT IN/ OUT |
| ACWC-120-Q-RF | Air-cooled | Reverse Flow | 120,000 BTU/HR* | 208-230/3/60460/3/60 | 1-1/2 HP 55gpm@30psi | 1 1/4” MNPT IN/ OUT |
| WCWC-120-E | Water-cooled | Portable | 120,000 BTU/HR** | 208-230/3/60460/3/60 | 1-1/2 HP 55gpm@30psi | 1 1/4” MNPT IN/ OUT |
| WCWC-120-E-ST | Water-cooled | Stationary | 120,000 BTU/HR** | 208-230/3/60460/3/60 | N/A | 1 1/4” MNPT IN/ OUT |
| WCWC-120-E-RF | Water-cooled | Reverse Flow | 120,000 BTU/HR** | 208-230/3/60460/3/60 | 1-1/2 HP 55gpm@30psi | 1 1/4” MNPT IN/ OUT |
* Capacity- 50°F LCWT/95°F AMB
** Capacity- 50°F LCWT/85°F CWT
Note: All specifications subject to change without notice. Specify Voltage and Ambient Condition upon ordering.
Pricing starts as low as $18,376.00
With a consistent maintenance schedule, our industrial chillers typically have an operational life of 15 to 20 years. Because we use heavy-duty powder-coated steel frames and high-grade scroll compressors, the units are built for 24/7 continuous duty.
Each unit undergoes a rigorous factory run-test in Houston under full load conditions before it leaves our floor. We verify all operating modes, calibrate the programmed temperature controllers, and stress-test every safety device, including high/low pressure switches and flow sensors. The refrigeration circuit and heat exchangers are checked for leaks, flow performance, and pressure stability to ensure your system arrives ready for immediate, reliable cooling.
To keep your 10-ton chiller running for its expected 15–20 year lifespan, follow this simple checklist:
Learn more in our guide: Chiller Maintenance Checklist
Standard warranty coverage includes one year on parts and five years on the compressor.
Yes. Every system is compatible with the Cold Shot Guardian™ App, a “smart chiller” real-time monitoring package. By connecting via local WiFi, LAN, or LTE, you can track setpoints, refrigerant pressures, and motor run times from your smartphone or desktop. The app provides predictive maintenance alerts and instant text/email notifications for alarm status or fault codes, helping you eliminate unscheduled downtime and maintain a permanent digital record of your chiller’s performance history.
Looking for a reliable 10-ton chiller system that keeps your process cool and your downtime low? Cold Shot’s air-cooled chillers are built tough for demanding industrial needs, giving you consistent unit cooling capacity and dependable performance.
From loading specifications model to tons capacity, we’ve got the details and expertise to help you select the right system for your application. Whether you’re looking at capacity control alarm output, condensing temperature specs, or just need fast info on 10-ton chillers, we make it easy.
Want pricing, lead times, or more info on the right chiller system for your operation? Contact Cold Shot Chillers today for immediate factory pricing and expert support.
Request a Quote