Cold Shot Chillers six-stage air-cooled water chillers are made in the USA and built to meet or exceed industry standards. Our industrial grade chillers are considered the most durable and dependable chillers on the market. We configure our 80-Ton chillers to meet a variety of flow designs for process cooling applications for breweries, metal finishing to plastic injection, blow mold and extrusion, and everything in between. We offer air-cooled and water-cooled versions in portable, stationary, reverse flow designs.
Each chiller includes a control package to manage the staging of the compressors to handle a wide heat load range. The onboard temperature controls ensure the chiller delivers constant leaving fluid temperatures during operation. Centrifugal pumps are supplied to provide virtually any flow and pressure that might be required to meet your site requirements. Safeties are built into the design to protect the chiller against any adverse conditions and provide codes to identify operation condition of the chiller.
Our model ACWC-960-GC is a six-stage “Portable” air-cooled water chiller system. This size chiller is sometimes referred as a central chiller as it is commonly used to remove heat from multiple areas within a facility.
The chiller includes a massive 625-gallon tank to hold your heat exchange fluid of treated water or some blend of glycol up to 50% concentration. The large capacity tank makes it possible to receive high temperature fluid coming back from your process without creating a drastic temperature rise in the tank. This is critical when maintaining a constant leaving fluid temperature. To ensure chiller efficiency two centrifugal pumps are used. One pump provides a recirculating circuit for the chiller. And a pump is used for the process, sized to match the flow and pressure need for your application.
The six-stage hermetic scroll compressors are programmed to stage on and off to maintain a consistent temperature setting while removing ample heat removal from your process or processes. The chiller uses an R410 refrigerant for effective and reliable cooling. Dual evaporators constructed of copper brazed stainless-steel plates with flow and temperature safeties protect against fluid freezing.
This unit will provide approximately 960,000 BTU/HR with 50°F leaving chill water temperature and 95°F ambient conditions. This is the closest thing to plug and play as it gets. The unit weighs approximately 4,600 lbs. with dimensions of 247” L x 88 ¼” W x 73” H.
Controls: This chiller comes standard with an electronic programmed temperature controller with constant (set point & process) readout to provide diagnostics and precise temperature. Fully factory tested.
Refrigeration Components: Efficient scroll compressors, balanced port expansion valves, sight glass/moisture indicators, pump down valves, filter drier, fan cycling head pressure controls.
Process Fluid Components: Bronze “Y” strainer with 20 mesh stainless steel screen. Pumps are stainless steel centrifugal. Tanks are insulated with shoe box lid, fill port, and level sight glass. Portable systems will include a bypass flow valve.
Safety Controls: High and low refrigerant pressure, high and low fluid temperature, freeze, low water flow, internal overloads, thermal overload circuit breakers and/or safety fuses for compressors, pumps, and fan motors, temperature relief fusible plug on liquid lines of each circuit.
Construction: Heavy duty powder coated frame and full metal cabinet, copper piping connections.
Warranty: One year for parts / five year for the compressor.
The six-stage air-cooled “Stationary” water chiller system from Cold Shot is ruggedly constructed and easy to install. Our model ACWC-960-GC-ST includes dual evaporators to efficiently remove heat from your external storage tank. Field plumbing and wiring are required to connect the external tank and pump to the chiller.
A common installation has a single pump recirculating fluid from the tank to the chiller and back to the tank. A flow safety switch and temperature sensor are used to maintain a constant temperature setting while providing a safety to the chiller in the event flow is interrupted or suspended. Additional pumps are typically connected to this tank to provide flow to certain areas in the facility and provide some level of redundancy.
Each system includes six reliable and energy efficient hermetic scroll compressors with environmentally friendly R-410A refrigerant designed for year-round use.
Chiller weighs approximately 3,050 lbs. and measures 151 1/8” L x 88 ¼” W x 73” H.
Controls: The unit comes standard Human Machine Interface (HMI) to provide cooling mode status, process and set value temperatures, and diagnostics of inputs and outs.
Refrigeration Components: Reliable and Energy Efficient scroll compressors, balanced port expansion valves, sight glass/moisture indicators, pump down valves, filter drier, fan cycling head pressure controls.
Process Fluid Components: Bronze “Y” strainer with 20 mesh stainless steel screen.
Safety Controls: High and low refrigerant pressure, high and low fluid temperature, low water flow, thermal overloads for compressor and fan motors.
Construction: Welded steel powder coated frame and full metal cabinet, copper piping connections.
Cold Shot Chillers “Reverse Flow” model ACWC-960-GC-RF chillers are designed specifically for an open circuit process where an external fluid central tank is required. Like a close loop chiller system, a reverse flow design will require a holding tank to be cooled and used to circulate the fluid to a process. It is typically used to gravity feed water into the chiller’s stainless-steel centrifugal pump. The pump sends the externally sourced water through the chiller strainer and evaporator before sending it back to the tank/trough or process. Many tanks used on a reverse flow design come with a water make up valve to ensure fluid is always present in the tank. Standard non coated or e-coated microchannel condenser coils are used.
The 80 Ton “reverse flow” chiller measures 247” L x 88 ¼” W x 73” H and weighs approximately 4,000 lbs.
Controls: The unit comes standard Human Machine Interface (HMI) to provide cooling mode status, process and set value temperatures, and diagnostics of inputs and outs.
Refrigeration Components: Efficient scroll compressors, balanced port expansion valves, sight glass/moisture indicators, pump down valves, filter drier, fan cycling head pressure controls.
Process Fluid Components: Strainer with 20 mesh stainless steel screen, easy to clean. Pumps are stainless steel centrifugal.
Safety Controls: High and low refrigerant pressure, high and low fluid temperature, low water flow, thermal overloads for compressor and fan motors, safety fuses or overloads for pump.
Construction: Welded steel powder coated frame and full metal cabinet, copper piping connections.
Warranty: One year for parts / five year for the compressor.
Cold Shot Chillers 80 Ton model WCWC-960-E water-cooled liquid chiller is designed to bring efficient and exceptional performance to all types of industrial applications. The chiller is easy to install and to operate.
Our 80 Ton portable water-cooled water chiller is a relatively quiet system and is typically installed indoors. These self-contained water-cooled systems provide 100% cooling capacity with a leaving fluid temperature of 50°F using an 85°F incoming condensing water temperature. The condensing water source can be from a cooling tower, geothermal or from a building supplied chiller water supply. Water-cooled chillers allow the refrigeration system to operate at lower head pressure, making them more efficient.
Water-cooled chillers recirculate water to cool the refrigerant in a stainless-steel copper brazed fluid condenser with head pressure control valve.
The 80 Ton model WCWC-960-E portable water-cooled chiller weighs approximately 1,900 lbs. and has dimensions of 98” L x 55” W x 88” H
Controls: The unit comes standard Human Machine Interface (HMI) to provide cooling mode status, process and set value temperatures, and diagnostics of inputs and outs.
Refrigeration Components: Efficient scroll compressors, sight glass/moisture indicators, balanced port expansion valves, filter drier, access ports and or service valves, pressure actuated head pressure controls, liquid receiver.
Process Fluid Components: Bronze “Y” strainer with 20 mesh stainless steel screen. Pumps are stainless steel centrifugal. Tanks are insulated with shoe box lid, fill port, and level sight glass. Portable systems will include a bypass flow valve.
Safety Controls: High and low refrigerant pressure controls, high and low fluid temperature, low water flow, thermal overloads for compressors, safety fuses or overloads for pump.
Construction: Welded steel powder coated frame and full metal cabinet, copper piping connections.
Warranty: One-year parts / five-year compressor.
The Cold Shot Chillers 80 Ton model WCWC-960-ERF “Reverse Flow” water-cooled water chiller is well designed footprint with a PLC controlled and self-diagnostics, WIFI/LAN/LTE connectivity for predictive maintenance.
An 80 Ton model WCWC-960-E-RF water-cooled fluid chiller provides 960,000 BTU/Hr. of cooling capacity with 50°F leaving fluid temperature with 85°F incoming condensing water temperature.
Water-cooled chillers are designed to dissipate process heat into a cooling tower, geothermal, or building supplied chilled water. These units are used in many applications and can provide a constant leaving fluid temperature with high efficiency and performance. Liquid cooled chillers range in size and are typically compact and designed to reside indoors protected from outdoor ambient conditions.
The unit measures 98” L x 55” W x 88” H and weighs approximately 1,700 lbs.
Controls: The unit comes standard Human Machine Interface (HMI) to provide cooling mode status, process and set value temperatures, and diagnostics of inputs and outs.
Refrigeration Components: Efficient scroll compressors, sight glass/moisture indicators, balanced port expansion valves, filter drier, access ports and or service valves, pressure actuated head pressure controls, liquid receiver. Environmentally friendly and energy efficient R410A Refrigerant.
Process Fluid Components: Bronze “Y” strainer with 20 mesh stainless steel screen. Pumps are stainless steel centrifugal with VFD options available for pressure or flow requirements
Safety Controls: High and low refrigerant pressure, high and low fluid temperature, low water flow, thermal overloads for compressors, safety fuses or overloads for pump.
Construction: Welded steel powder coated frame and full metal cabinet, copper piping connections.
Warranty: One-year parts / five-year compressor.
| Model # | Type | Style | Capacity | Voltage | Pump HP + Flow Rate | Connections |
| ACWC-960-GC | Air-cooled | Portable | 960,000 BTU/HR* | 208-230/3/60460/3/60 | 7.5 HP 225 GPM @35 PSI | 4” 150# FLANGE (IN/OUT) |
| ACWC-960-GC-ST | Air-cooled | Stationary | 960,000 BTU/HR* | 208-230/3/60460/3/60 | N/A | 4” 150# FLANGE (IN/OUT) |
| ACWC-960-GC-RF | Air-cooled | Reverse Flow | 960,000 BTU/HR* | 208-230/3/60460/3/60 | 7.5 HP 225 GPM @35 PSI | 4” 150# FLANGE (IN/OUT) |
| WCWC-960-GC | Water-cooled | Portable | 960,000 BTU/HR* | 208-230/3/60460/3/60 | 7.5 HP 225 GPM @35 PSI | 4” 150# FLANGE (IN/OUT) |
| WCWC-960-GC-ST | Water-cooled | Stationary | 960,000 BTU/HR* | 208-230/3/60460/3/60 | N/A | 4” 150# FLANGE (IN/OUT) |
| WCWC-960-GC-RF | Water-cooled | Reverse Flow | 960,000 BTU/HR* | 208-230/3/60460/3/60 | 7.5 HP 225 GPM @35 PSI | 4” 150# FLANGE (IN/OUT) |
* Capacity- 80°F LCWT/95°F AMB
** Capacity- 80°F LCWT/85°F CWT
Note: All specifications subject to change without notice. Specify Voltage and Ambient Condition upon ordering.
Pricing starting as low as $63,800.00
Request a Quote